route to overlapping subnets on a SRP527W throught a VPN

[philip daly]

Hi,

I have a site to site VPN set up on a SRP 527W router. The local subnet is 10.0.0.0 and remote subnet is 192.168.2.0. I can ping site to site.

The problem is that the router on the 192.168.2.0 network has routes to other networks. say 192.168.16.x

If i ping from the 10.0.0.0 network to 192.168.16.x networkk there is no communication. the traffic is being sent to the internet (traceroute)

can i route the 192.168.16.x traffic through a tunnel inteface to 192.168.2.0

I can create a GRE tunnel but i cant route the traffic throught the tunnel. i can only route through WLAN1 and LAN1

frimware is 1.01.22(vp003) may 19 2011

thanks

phil

[Andrew Hickman]

Hi Phil,

Have you tried creating a second IPSec profile on the remote router to forward the 192.168.16.x traffic to the central site?

Andy

[philip daly]

Hi Andy,

We changed to routers that support VPN routing. we can now route through an interface thats bound to the VPN policy.

was able to create a tunnel interface and route traffic throught the tunnel.

Phil