RV 345 - SNMP - WAN 1 & WAN 2 trafic

[csegonds]

HI,

I put my RV 345 in the firmware 1.0.02.16

What is the SNMP OID for monitoring WAN1 and WAN2 trafic IN/OUT ?

Thanks

[daveyrb]

I have this issue as well they worked fine in 1.0.01.20 and where:

WAN 1 

1.3.6.1.2.1.31.1.1.1.6.5

1.3.6.1.2.1.31.1.1.1.10.5

WAN2

1.3.6.1.2.1.31.1.1.1.6.6

1.3.6.1.2.1.31.1.1.1.10.6

But after upgrading to 1.0.02.16 They no longer work I found I found these but they show the same for In and Out:

ifInOctets.30 2311274545 Counter32 192.168.0.1:161
ifInOctets.31 0 Counter32 192.168.0.1:161
ifInOctets.32 2350608743 Counter32 192.168.0.1:161
ifInOctets.33 194002918 Counter32 192.168.0.1:161
ifInOctets.34 171552629 Counter32 192.168.0.1:161

ifOutOctets.30 2311274545 Counter32 192.168.0.1:161
ifOutOctets.31 0 Counter32 192.168.0.1:161
ifOutOctets.32 2350608743 Counter32 192.168.0.1:161
ifOutOctets.33 194002918 Counter32 192.168.0.1:161
ifOutOctets.34 171552629 Counter32 192.168.0.1:161

It looks to me like SNMP is broken so I have rolled back to 1.0.01.20 until it's fixed.

[JustinHardin]

FWIW, I'm seeing good data, using SNMPWalk.exe (Solar Windows SNMP Walker) on rv345 firmware 1.0.03.20

.1.3.6.1.2.1.31.1.1.1.6.*  (ifHCInOctects)

.1.3.6.1.2.1.31.1.1.1.7.* (ifHCInUcastPkts)

.1.3.6.1.2.1.31.1.1.1.10.* (ifHCOutOctets)

.1.3.6.1.2.1.31.1.1.1.11.* (ifHCOutUcastPkts)

(where * is the numeric representation of the interface...which for me us WAN1, WAN2, VLAN1

I have not yet figured out how to show that in Solar Windows or OPENNMS correctly, but I'm an SNMP beginner.