01-31-2019 10:53 AM - edited 01-31-2019 10:54 AM
HI,
I put my RV 345 in the firmware 1.0.02.16
What is the SNMP OID for monitoring WAN1 and WAN2 trafic IN/OUT ?
Thanks
02-07-2019 04:26 AM
I have this issue as well they worked fine in 1.0.01.20 and where:
WAN 1
1.3.6.1.2.1.31.1.1.1.6.5
1.3.6.1.2.1.31.1.1.1.10.5
WAN2
1.3.6.1.2.1.31.1.1.1.6.6
1.3.6.1.2.1.31.1.1.1.10.6
But after upgrading to 1.0.02.16 They no longer work I found I found these but they show the same for In and Out:
ifInOctets.30 2311274545 Counter32 192.168.0.1:161
ifInOctets.31 0 Counter32 192.168.0.1:161
ifInOctets.32 2350608743 Counter32 192.168.0.1:161
ifInOctets.33 194002918 Counter32 192.168.0.1:161
ifInOctets.34 171552629 Counter32 192.168.0.1:161
ifOutOctets.30 2311274545 Counter32 192.168.0.1:161
ifOutOctets.31 0 Counter32 192.168.0.1:161
ifOutOctets.32 2350608743 Counter32 192.168.0.1:161
ifOutOctets.33 194002918 Counter32 192.168.0.1:161
ifOutOctets.34 171552629 Counter32 192.168.0.1:161
It looks to me like SNMP is broken so I have rolled back to 1.0.01.20 until it's fixed.
01-14-2021 08:17 AM
FWIW, I'm seeing good data, using SNMPWalk.exe (Solar Windows SNMP Walker) on rv345 firmware 1.0.03.20
.1.3.6.1.2.1.31.1.1.1.6.* (ifHCInOctects)
.1.3.6.1.2.1.31.1.1.1.7.* (ifHCInUcastPkts)
.1.3.6.1.2.1.31.1.1.1.10.* (ifHCOutOctets)
.1.3.6.1.2.1.31.1.1.1.11.* (ifHCOutUcastPkts)
(where * is the numeric representation of the interface...which for me us WAN1, WAN2, VLAN1
I have not yet figured out how to show that in Solar Windows or OPENNMS correctly, but I'm an SNMP beginner.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide