Hello
We want to use an RV042 to establish an IPSEC site-site connection into our core Cisco device. The RV042 will have 192.168.1.0/24 subnet configured on it. There will also be multiple 192.168.x.0/24 subnets connecting into into the core network, We want the RV042 to have connectivity to all the remote subnets. The other remote routers do not support IPSEC.
When configuring the IPSEC, will the RV042 allow me to configure multiple 192.168.x.0/24 remote subnets? If not, will it allow me to configure 192.168.0.0/16 as the remote subnet -bearing in mind that its own subnet - 192.168.1.0/24, is contained within the 192.168.0.0/16 route which we want to point down the IPSEC tunnel?
Thanks very much
Peter
