cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
684
Views
0
Helpful
1
Replies

RV042 site to site vpn issue with subnet

335751
Level 1
Level 1

hello everyone

i have two rv042 device

rv042 A  local 192.168.1.0/24 and 10.0.0.0/24  working on gateway mode nat and set mutlinet subnet 192.168.1.0/10.0.0.0

a ip address=192.168.1.1

rv042 B local 192.168.2.0/24 working on gateway mode working on gateway mode nat and set mutlinet subnet 192.168.2.0

a ip address=192.168.2.1

ipsec vpn between A and B                          

the issue is  192.168.1.0 can communicate to 192.168.2.0

the network 192.168.1.0 as vlan1

the network 10.0.0.0 as vlan2

in L3 switch default route all to 192.168.1.1

192.168.2.0 communicate 192.168.1.0 was fine

but the network 10.0.0.0 can't communicate to 192.168.2.0

i already try to set statis route on device B but won't work

it's a useless on RV042 or wrong setup ?

1 Reply 1

anjraj
Level 1
Level 1

Hi Xiang,

I think this article might be a good place to start: VPN Clients and Certificate Management Setup on RV016, RV042, RV042G, and RV082 VPN Routers.

Hope this helps,

Anjana