01-23-2012 07:04 AM
Hello,
Here's a quick diagram of what I realized:
Windows 2008 --- LAN1 (Ipcop) --- --- LAN2 web over VPN (cisco RV120W) --- PC
My ping RV120W well my windows 2008 and vice versa, although my client PC ping cisco 2008 and the windows.
On the Cisco DHCP relay I add the ip of my 2008 and I declare it an area plan with the active DHCP IP LAN2.
My client are unable to retrieve IP address with a Cisco 800 Series it worked well :-(
Would you have any idea
thank you
01-25-2012 06:52 AM
I asked a question because I managed this operation with a cisco 857, but the RV120 or RV220 cisco can they do the dhcp relay through a VPN tunnel ?
01-25-2012 07:07 AM
II found an old post that says this is impossible, is there a manipulation to correct this problem? this is very improtant because we had to use a dozen copies of this model.
I try to change backup.cfg
DhcpRelay = {}
DhcpRelay[1] = {}
DhcpRelay[1]["DhcpRelayStatus"] = "1"
DhcpRelay[1]["LogicalIfName"] = "LAN"
DhcpRelay[1]["virtualIfName"] = "bdg1"
DhcpRelay[1]["_ROWID_"] = "1"
DhcpRelay[1]["RelayGateway"] = "IP DHCP SERVEUR"
to
DhcpRelay = {}
DhcpRelay[1] = {}
DhcpRelay[1]["DhcpRelayStatus"] = "1"
DhcpRelay[1]["LogicalIfName"] = "sit0-WAN1"
DhcpRelay[1]["virtualIfName"] = "sit0"
DhcpRelay[1]["_ROWID_"] = "1"
DhcpRelay[1]["RelayGateway"] = "IP DHCP SERVEUR"
And restore the file but i've this error "Failed to update configuration as the file may have been invalid/corrupted"
Grrrr
01-30-2012 08:17 AM
you know if a new firmware version will come out, because this problem is extremely blocking for me.
thank you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide