RV215 routing between sites over IPSEC VPN

[wjlawrence]

I have a deployment of two RV215 routers with site to site VPN tunnel between them.

The tunnel comes up and passes traffic.

I can web to the RV215 on the far side no issues go to the other side and that also works to access the remote RV215.

I can't get beyond the RV215 at the remote side.

Local Side 192.168.2.1/24 RV215

PC 192.168.2.104

Far Side 192.168.3.1/24 RV215

PC 192.168.3.101

The PC on each network can see the local and the remote RV215 no issue.  I can not reach the PC and any other device other than the RV215.

Please let me know your thoughts.

Bill

[Mehdi Boukraa]

Hi, 

If you can reach from the PC local site to the remote IP address of the router on both site , this is good it means no problem with the VPN it self, can you plese check the firewall on PC (windows firewall or any antivirus), try to disable them and try again 

Please let me know.

Please rate this post or marked as answered to help other Cisco Customers

Greetings

Mehdi