cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1633
Views
0
Helpful
0
Replies

RV220W - Error: The modem (or other connecting device) has reported an error

Cosimo Amore
Level 1
Level 1

Hello Guys

Error message appears during the SSL VPN thin client installation.

I got a pop-up containing the following message:

Error: The modem (or other connecting device) has reported an error.

Does anyone have a clue how to solve this issue??

In the windows event viewer there are the following  tree messages:

1st message:

CoId={12AF2975-19BB-4219-A007-C810160B9604}: The user EU\xxxx has started dialing a Dial-up connection using a all-user connection profile named VirtualPassage. The connection settings are:

Dial-in User =

VpnStrategy =Not Applicable

DataEncryption = None

PrerequisiteEntry =

AutoLogon = No

UseRasCredentials = Yes

Authentication Type = PAP/CHAP/MS-CHAPv2

Ipv4DefaultGateway = No

Ipv4AddressAssignment = By Server

Ipv4DNSServerAssignment = By Server

Ipv6DefaultGateway = No

Ipv6AddressAssignment = By Server

Ipv6DNSServerAssignment = By Server

IpDnsFlags =

IpNBTEnabled = Yes

UseFlags = Private Connection

ConnectOnWinlogon = No.

2nd message is:

CoId={12AF2975-19BB-4219-A007-C810160B9604}: The user EU\xxxx is trying to establish a link to the Remote Access Server for the connection named VirtualPassage using the following device:

Server address/Phone Number = 0

Device = Virtual Passage SSLDrv Adapter

Port = ISDN26-0

MediaType = ISDN.

and finally the error - 3rd message:

CoId={12AF2975-19BB-4219-A007-C810160B9604}: The user EU\xxxx dialed a connection named VirtualPassage which has failed. The error code returned on failure is 651.

0 Replies 0