RV220W - Exchange Mode of "Main" help

[doug_counsil]

We have not been able to get the exchange mode of "Main" to work (with IPSecuritas/Mac Lion) on the RV220W like we had the WRVS4400N v2.

It seems that the RV220W doesn't use the "hard-coded" Local Side IP address we put in IPSecuritas.  It only seems to look at the WAN IP.  This makes sense because that is how we set the IKE policy up on the RV220W (to use Remote Identifier Type of "Remote WAN (Internet) IP"), but we were hoping IPSecuritas would be able to fake out the remote IP (similar to how it did for the WRVS4400N v2).

I hope I am making sense.  Has anyone had any success with the exchange mode of "Main" to work with IPSecuritas on a Mac?

[mpyhala · Accepted solution]

Hi Curtis,

Thank you for posting. I was not able to get it to work using Main Mode, only Agressive worked for me.

[doug_counsil]

Thank you for the quick response/answer.