RV320 router port forwarding

[robert]

My name is Robert, and recently I swinch my router from a comercial router to a more bussines router.

Because I have internet connection problem in my area, I make 2 contract whit 2 diferent internet providers.

I buy a dual WAN RV320 Cisco Router and I would like to make some port forwarding to access my servers from internet.

Before to buy the Cisco Router I have TP-Link TL-ER604W dual wan, and the port forwarding it not was a problem, but now whit the Cisco router I can not do that.

so my scenario is:

server: internal ip address 192.168.1.253 port 3389 ( for remote desktop access)

server: internal ip address 192.168.1.252 port 3390 (for remote desktop access)

server: internal ip address 192.168.1.116 port 3391 (for remote desktop access)

server: internal ip address 192.168.1.2 port 25565 (for remote desktop access)

surveillance dvr 1: ip address 192.168.1.150 port 7001 (for remote camera view)

surveillance dvr 2: ip address 192.168.1.151 port 9098 (for remote camera view)

I have a public static IP: 8XX.XXX.XXX.250 on WAN1 whit PPPoE and on WAN2 Obtain an IP automatically. My internal network is working, and I can access the servers via remote desktop w/o any problems.

Please, can you give me an idea what I'm doing wrong?

Thank you,

Robert

[jasonb1024]

Having similar issue using port forwarding example I have port 3389, 3390, and 3391 forwarding and only ports 3389 and 3391 will open when forwarding. I am also having similar issues when I forward other ports some will work however some will not. I also have noticed when  I deleted a forwarding rule and recreated it will the same information this port will not open now.

[jasonb1024]

I resolved the port forwarding issue. Delete port forwarding rule created and reboot router and recreate port forwarding rule it has worked several times for me.

[ScottCappellani]

Yep worked for me too

[#5]

have you been able to find a solution for this problem, i have the same setup basically as you. and would like to have my ports forwarded in case the 1st ISP goes down