RV320 to RV325 Site to Site VPN

[jburrows78]

I have an established Site to site Tunnel between two remote locations. I am able to ping both switches  from within each switch. However I am not able to see/ping anything else on the subnet.

Site 1:

Switch 1 IP:192.168.5.1

192.168.5.0

255.255.255.0

Switch 2 IP:192.168.0.211

Site 2 tunnel settings

192.168.0.0

255.255.255.0

[Mehdi Boukraa]

Hi Jburrows,

Please make sure the PC's has the firewall disable , or any antivirus acting as firewall, also please make sure all the pc's having default gateway the IP address of the routers

Please rate this post or marked as answered to help other Cisco Customers

Greetings

Mehdi

[jburrows78]

I had the server on the remote side of the tunnel pointing to the wrong gateway. It needed to point to my cisco RV320 IP. It was pointing to my verizon router.