05-27-2015 08:41 AM
I have this router RV325 that i configure as gateway to the internet. It shows status as connected in the cisco panel but my client machine cannot access the internet. I disable dhcp because i don't need it. i have a server that does dhcp.
05-27-2015 11:09 AM
Hello,
Connect the PC direct to modem and test the internet. If it still does not work, then call your ISP.
Also, with the modem connected tot he RV325, you can test ping from the RV325 to internet.
- System Management - Diagnostics - Ping - 8.8.8.8
If the ping replies then you have an issue on your PCs IP configuration.
If it does not ping, then an issue with the modem - RV325 link.
Remember, the RV325 WAN and the LAN cannot be on the same subnet. Ex. 192.168.1.x/24
Best Regards,
Mike
06-02-2015 01:06 PM
Thank you for your response.
My router is connected to the internet now but i have not being able to configure the port forwarding.
i have a local web application that i need external clients to be able to use.
Kindly assist on this
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide