RV430W DHCPv6 relay

[Maarten2]

In my RV340W Router (firmware 1.0.03.15), it appears that I cannot find any DHCPv6 relay option. There is one for DHCPv4, but apparently not for DHCPv6.

I have checked in the "LAN -> VLAN Settings -> Edit VLAN Details" menu, as well as in the "LAN -> LAN/DHCP Settings" menu, but there I can only find the aforementioned DHCPv4 relay options.

How can I make my RV340W a DHCPv6 relay?

[Glenn Martin]

Hello Maarten2,

I'll check but, do you see this in the LAN/DHCP:

[Maarten2]

Thanks for getting back to me,

I do indeed see the screen you mentioned. However, from what I can tell, this is merely a summary of what can be configured in the VLAN Settings screen, plus the option to configure DHCP using a configuration wizard.

Below are some screen shots from my device's configuration menu. These illustrate my observations that for IPv4, there does seem to be a DHCP relay option, while for IPv6 there is not.

1. VLAN Settings: DHVPv6 settings only contain Disabled and Server as options. There is no Relay option

2. LAN/DHCP Settings: DHCP mode for IPv6 is listed as Server

3. LAN/DHCP Settings - Edit DHCP Configuration Wizard (page 4): For IPv6 The only available options are Disabled and Server. There is no Relay option.

[Jo Kern]

Hi, DHCPv6 Relay IP Address is currently not supported ( 1.0.03.15 and before ).

Will put it on the roadmap.

Jo