Hi,
I'm attempting to configure a new RVS4000 router with DHCP Host Relay enabled. Right now the system is setup in Gateway mode as follows:
The WAN port is configured with IP: 192.168.2.250, subnet 255.255.255.0. The dhcp server on this network is located at 192.168.2.1.
The LAN port is configured with IP: 192.168.1.1, subnet mask 255.255.255.0, DHCP is set to relay to 192.168.2.1
Once I configure the router and reboot, the laptop used to program the router can't see the router or internet. It fails to lease an IP from the DHCP server on the WAN connection. Any idea what I am doing wrong?
Mykel
