srp521 DSCP marking on qos

[Sage Major]

I am running 1.1.24 and spa303 phones

I have a qos policy setup to mark all packets                  

The following is my qos

information 192.168.1.15/24

makring enabled

cos/DSCO DSCO

Value 0xb8

On my upstream device I only allow traffic that is marked with this dscp value.  No traffic is coming through.  RTP traffic is marked because it comes off the phone marked but I would expect the qos Policy so mark everything going to that ip space to be marked.  Am I djust doing something wrong?

Sage

[Andrew Hickman]

Hi Sage,

Try using a 32 bit mask for your host address.

Andy