VLAN routing on the WRVS4400N

[kenrisdon]

I have installed a WRVS4400N router for a client and created 3 vlans.  I would like to route some traffic between the vlans so I turned on intra-vlan routing.  Is there  a way to limit what traffic is routed between the vlans?  I only want computers on vlan 1 to access computers on vlan 2 and computers on vlan 3 should not be able to access any other computers on any other vlans.  Thanks for your help.

[jasbryan]

Ken,

Yes in these models it's only inter-vlan routing on or off. We can't restrict certain vlans and not others. So it's either all or nothing. In our RV (RV120 RV220)(SA5xx) models gives the ability to turn inter-vlan routing on the vlan itself which is what you are trying to accomplish.

Thanks,

Jason

Cisco Support Engineer

.:|:.:|:..

[kenrisdon]

Thanks for the reply Jason.  So does that mean that the firewall feature on the WRVS4400N has no impact on the vlan to vlan traffic?