Hi all please help me ![Smiley Very Happy :smileyvery-happy:](http://linksys.i.lithium.com/i/smilies/16x16_smiley-very-happy.gif)
I have WRVS4400N V2 FW Version:V2.0.2.1
in gateway mod with one public address
And a lots of questions :
For what is necessary VLAN interrouting ? At which nivel is routing ? if at the IP nivel ?
ACL :
I have an architecture like that
_______________VLAN1 SSID default
/ ____________VLAN2 SSID Officina
| / _________VLAN3 SSID telphonia
| | / ______VLAN4 not used
| WIFI /
_|__|__|__|__
| |--Eth-- VLAN1 default 192.168.1.0/32
internet | WRVS4400N |--Eth-- VLAN2 office 192.168.2.0/32
| |--Eth-- VLAN3 IPphone 192.168.3.0/32
|_____________|--Eth-- VLAN4 Servidores(DMZ) 192.168.254.0/32
I want to allow VLAN1 to go only on INTERNET
VLAN2 only on VLAN4
VLAN4 on VLAN2 y INTERNET.
And For now VLAN3 stay alone
I can not do my ACL because,
- one I can not limit access to internet at other ip address than 192.168.1.x
- two i can not limit with destination Interface. only with source interface.
IPV6 :
IP V6 why it's not working ?
Why I can not create a subnetwork for vlan ?
Can I Create ACL fo IPV6 ?
In setup>ip mode tab
Dual-Stack IP : Enable
Gateway access control : Disable
In Setup>Lan
IPv6 : 2002:1234:5678:0:1425::1 /64
To what correspond this IPV6 address ?
the network the prefix the router ipv6 address ?
DHCP6 address range start: 2002:1234:5678:0:1425::100
DHCP6 address range end: 2002:1234:5678:0:1425::200
DNS : 2001:4860:4860::8888
2001:4860:4860::8844
Thanks a lot for your help