Hello folks, just need a little guidance as to how to resolve my IOS upgrade issue on my 3825. I have the following statement on my running config.
"boot system flash c3825-advipservicesk9-mz.124-15.T6.bin"
I keep getting the following message when I try to boot to that image (Reload)
console by console.
%SYS-3-IMAGE_TOO_BIG: 'flash:c3825-advipservicesk9-mz.124-15.T6.bin' is too large for available memory (50954264 bytes).
%SYS-6-READ_BOOTFILE_FAIL: flash:c3825-advipservicesk9-mz.124-15.T6.bin File read failed -- Not enough space.
Attached is a copy of the show version & show flash.
TS1#sh flash
-#- --length-- -----date/time------ path
1 32658112 Apr 18 2007 20:45:34 -04:00 c3825-advipservicesk9-mz.124-3g.bin
2 1038 Aug 16 2007 22:11:20 -04:00 home.shtml
3 1826 Aug 16 2007 22:11:22 -04:00 sdmconfig-38xx.cfg
4 113152 Aug 16 2007 22:11:22 -04:00 home.tar
5 1475584 Aug 16 2007 22:11:24 -04:00 common.tar
6 6141952 Aug 16 2007 22:11:32 -04:00 sdm.tar
7 861184 Aug 16 2007 22:11:40 -04:00 es.tar
8 793739 Aug 16 2007 22:11:24 -04:00 256MB.sdf
9 1684577 Apr 18 2007 20:55:48 -04:00 securedesktop-ios-3.1.1.27-k9.pkg
10 398305 Apr 18 2007 20:56:08 -04:00 sslclient-win-1.1.0.154.pkg
11 3873 Dec 19 2007 20:35:30 -05:00 pre_autosec.cfg
12 51491936 Dec 03 2008 23:08:10 -05:00 c3825-advipservicesk9-mz.124-15.T6.bin
32526336 bytes available (95653888 bytes used)
TS1#
TS1#sh ver
Cisco IOS Software, 3800 Software (C3825-ADVIPSERVICESK9-M), Version 12.4(3g), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 06-Nov-06 05:10 by alnguyen
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
TS1 uptime is 2 hours, 33 minutes
System returned to ROM by power-on
System image file is "flash:c3825-advipservicesk9-mz.124-3g.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco 3825 (revision 1.1) with 747520K/38912K bytes of memory.
Processor board ID <Removed>
2 FastEthernet interfaces
2 Gigabit Ethernet interfaces
16 terminal lines
2 Channelized (E1 or T1)/PRI ports
1 Virtual Private Network (VPN) Module
4 Voice FXO interfaces
4 Voice FXS interfaces
DRAM configuration is 64 bits wide with parity enabled.
479K bytes of NVRAM.
125440K bytes of ATA System CompactFlash (Read/Write)
Configuration register is 0x2102
TS1#
Thanks in advanced I appreciate your help.
