7507 VIP

[ashookoul]

Hello

Can we install two different VIP on one router like

VIP6-80 RM7000B controller (16 Serial).

VIP2 controllers (4 FastEthernet)(8 Serial)(16 E1).

For ur convience i have pasted SH VER also.

Cisco Internetwork Operating System Software

IOS (tm) RSP Software (RSP-PV-M), Version 12.2(12f), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2003 by cisco Systems, Inc.

Compiled Thu 12-Jun-03 17:55 by pwade

Image text-base: 0x60010948, data-base: 0x61168000

ROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1)

PNB_DRS uptime is 6 days, 14 hours, 51 minutes

System returned to ROM by error - a Software forced crash, PC 0x603CF4C0 at 10:39:56 UTC Sat May 21 2005

System restarted at 23:23:27 UTC Sat May 21 2005

System image file is "slot1:rsp-pv-mz.122-12f.bin"

cisco RSP4+ (R5000) processor with 65536K/2072K bytes of memory.

R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache

Last reset from power-on

G.703/E1 software, Version 1.0.

G.703/JT2 software, Version 1.0.

Channelized E1, Version 1.0.

X.25 software, Version 3.0.0.

Bridging software.

Primary Rate ISDN software, Version 1.1.

Chassis Interface.

1 VIP6-80 RM7000B controller (16 Serial).

3 VIP2 controllers (4 FastEthernet)(8 Serial)(16 E1).

4 FastEthernet/IEEE 802.3 interface(s)

241 Serial network interface(s)

123K bytes of non-volatile configuration memory.

16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).

16384K bytes of Flash PCMCIA card at slot 1 (Sector size 128K).

16384K bytes of Flash internal SIMM (Sector size 256K).

Slave in slot 3 is running Cisco Internetwork Operating System Software

IOS (tm) RSP Software (RSP-DW-M), Version 12.2(12f), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2003 by cisco Systems, Inc.

Compiled Thu 12-Jun-03 16:09 by pwade

Slave: Loaded from system

Slave: cisco RSP4+ (R5000) processor with 65536K bytes of memory.

Configuration register is 0x2102

AK

[thisisshanky]

Ashok,

I ran your config through Software advisor, and have to say your router is fully loaded, if I got your configuration right from your show version (with the exception of 1 slot free in the 7507). Am I right ?

Definitely multiple VIP configurations seems to be supported on the 7507, according to the software advisor. I didnt know what VIP2 controller you have as there are three different models (15,40 and 50) so I put VIP2-15 in my configuration. The final output of the software advisor suggest minimum compatible release for this hardware configuration as

12.1.22(E6) with a ServiceProvider(VIP) feature set(which is the same feature set that you have with your current IOS)

The latest in this train available for download is 12.1.26(E1)

I would suggest an IOS upgrade, to avoid the crashes you are seeing in your configuration

HTH

PS: I can rerun the config, if you can update me with the VIP2 model number.

[thisisshanky]

Duplicate post

[thisisshanky]

Duplicate post

[ashookoul]

Shanky thanks for ur reply but i dont have have the model number of VIP2 as router is not showing model number anywhere.

AK

[thisisshanky]

A show diag should probably show it.

[ashookoul]

Hi shanky

i have checked sh diag also but i did not get,

for u i have attached sh diag output also.

AK