03-23-2018 09:50 AM - edited 03-05-2019 10:09 AM
We have implemented a new test system on our network. we have created SVIs with a IP range to have a /24. The following is an example of the format we have. The one machine and range in question are in two seperate vlans. Below is a configuration example of what we have in there now.
VLAN 38
ip access-list ext 2138 in
10 permit ip xx.xx.38.0 0.0.0.255 host xx.xx.21.254
ip access-list ext 138 out
10 permit ip host xx.xx.21.254 xx.xx.38.0 0.0.0.255
we cannot ping from the .254 box to a box on the .38.0 network.
is this the right format to allow communication with each other?
03-23-2018 10:34 AM
What platform is this configured for? Please provide the configuration (at least of the two interfaces involved) so that we can better evaluate what you are configuring.
HTH
Rick
03-25-2018 04:19 PM
Could you ping before you applied the ACLs? IOW - could it be a routing issue?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide