Hi ^_^
I've got a c1900 I’m having a hard time getting the securityk9 license to “activate . Any help would be appreciated.
Router#SHow VERsion
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.0(1)M2,
System returned to ROM by power-on
System image file is "flash0:c1900-universalk9-mz.SPA.150-1.M2.bin"
Last reload type: Normal Reload
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 CISCO1941W-E/K9 FCZ1425C0RF
Technology Package License Information for Module:'c1900'
----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
-----------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security None None None
data None None None
Configuration register is 0x2102
Index 1 Feature: ipbasek9
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Index 2 Feature: securityk9
Period left: 0 minute 0 second
License Type: Evaluation
License State: Active, Not in Use, EULA accepted
License Count: Non-Counted
License Priority: Low
Index 3 Feature: datak9
Period left: 8 weeks 4 days
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 4 Feature: SSL_VPN
Period left: 8 weeks 4 days
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
License Count: 75/0/0 (Active/In-use/Violation)
License Priority: None
Index 5 Feature: ios-ips-update
Router#show license feature
Feature name Enforcement Evaluation Subscription Enabled
ipbasek9 no no no yes
securityk9 yes yes no no
datak9 yes yes no no
SSL_VPN yes yes no no
ios-ips-update yes no yes no
