ASR 901 SVI based EoMPLS

[wandal]

Hi,

I'm trying to configure SVI based eompls on the 901, and this is the error I get:

interface GigabitEthernet0/5

service instance 202 ethernet

  encapsulation dot1q 202

  rewrite ingress tag pop 1 symmetric

  bridge-domain 202

ASR-901-TEST(config)#int vlan 202

ASR-901-TEST(config-if)#x

ASR-901-TEST(config-if)#xconnect ?

  A.B.C.D  IP address of peer

ASR-901-TEST(config-if)#xconnect 10.20.4.15 15 enc

ASR-901-TEST(config-if)#xconnect 10.20.4.15 15 encapsulation m

ASR-901-TEST(config-if)#xconnect 10.20.4.15 15 encapsulation mpls

The Vl202 a vlan interface - command rejected.

The box is running asr901-universalk9-mz.152-2.SNI code.

I realise you can configure the xconnect on the EFP but we were looking to have multiple EVCs share one bridge domain and do the xconnect on the SVI.

Am I missing something or is this feature not supported on the current code?

Thanks.

[manib]

Hi Alfred,

We don't support xconnect with ASR901 on SVI.  In fact we implemented the CLI error message while attempting to do so.  We support on EVC and port only.

Cheers,

/Mani

[wandal]

Hi Mani,

Thanks for your reply.

Do you know whether there are any plans to have this feature supported in future code or is it a hardware limitation?

Regards,

Alfred Wandati.

[manib]

Hi Alfred,

We won't have this on ASR901's radar, and in fact we implemented error message mechanism to alert our

customers.  Its a ASIC and feature limitation on ASR901 alone. 

Cheers,

/Mani

[wandal]

Hi Mani,

Thanks for the clarification, we'll just have to work with the xconnect on the EVC.

Regards,

Alfred Wandati.

[gjaimes]

HI guys,

Do you have any news about supporting SVI based EoMPLS on ASR901?

Thanks,