Hi,
I have a customer that is having an issue with an ASR9006 fan, below is what they sent.
We installed a fan tray this past Friday and it doesn't seem to be recognized by the ASR. I've included show commands below to show what is going on. The fpd pie is installed and active, however does not show ASR-9006-FAN-V2 listed. When running the hw-module fpd location command, the v2 fan tray type is listed as N/A.
The IOS-XR version is 5.1.3. Let us know if there is something we can do to rectify this.
Thanks.
RP/0/RSP0/CPU0:STX02-A9K#admin show platform
Sun Aug 22 13:10:36.939 AST
Node Type State Config State
-----------------------------------------------------------------------------
0/RSP0/CPU0 A9K-RSP-4G(Active) IOS XR RUN PWR,NSHUT,MON
0/RSP1/CPU0 A9K-RSP-4G(Standby) IOS XR RUN PWR,NSHUT,MON
0/FT0/SP ASR-9006-FAN READY
0/0/CPU0 A9K-4T-B IOS XR RUN PWR,NSHUT,MON
0/1/CPU0 A9K-4T-B IOS XR RUN PWR,NSHUT,MON
0/2/CPU0 A9K-SIP-700 IOS XR RUN PWR,NSHUT,MON
0/2/0 SPA-2XOC48POS/RPR OK PWR,NSHUT,MON
0/PM0/SP A9K-2KW-DC READY PWR,NSHUT,MON
0/PM1/SP A9K-2KW-DC READY PWR,NSHUT,MON
