ATM AIM Module

[pramod]

which modules will support ATM AIM config on 12k and 7600 routers

[Giuseppe Larosa]

Hello Pramod,

on C7600 you have two options:

using a PA ATM with a Flexwan linecard

http://www.cisco.com/en/US/products/hw/switches/ps708/products_data_sheet09186a00801df1d9.html

or

using an ATM SPA with a SIP linecard

http://www.cisco.com/en/US/prod/collateral/routers/ps368/product_data_sheet0900aecd8027c9df_ps708_Products_Data_Sheet.html

http://www.cisco.com/en/US/prod/collateral/routers/ps368/product_data_sheet0900aecd8027c9e6_ps708_Products_Data_Sheet.html

on GSR you have two options:

ATM linecards (EOS)

http://www.cisco.com/en/US/prod/collateral/routers/ps167/product_data_sheet0900aecd8042b41a.html

or SPAs on SIP linecard

Hope to help

Giuseppe

[pramod]

Hi Giuseppe,

Thanks for your reply.I need the following syslog to be generated on 7600 series device

1) ATM_AIM-5-ACTIVE_LINK_CHANGE

2) ATM_AIM-5-ACTIVE_LINK_(DOWN|UP)

Which SPA will support the config?How to configure to get this syslog?Please help!

[Giuseppe Larosa]

Hello Pramod,

this second question is more specific I think the answer is no.

AIM is a specific HW module used on ISR routers or others.

There are ATM SPA specific messages but they include a different memonic.

see

http://www.cisco.com/en/US/products/hw/routers/ps368/products_system_message_guide_chapter09186a008069a77b.html#wp1253979

I think you need to look for messages that are similar to those you are indicating.

Or also you can look at SNMP traps.

Hope to help

Giuseppe