Hey, imagine that I have in my routing table routes to a same destination:a) iBGP (via a network /24) and OSPF destination via a /27 network address;Given the administrative distance that for iBGP is 200, is the OSPF (adm distance=110) the preferred ...
Hi I have a Cisco ISR2811 running advanced ip services with CME and CUE in it.I need to Port forward from the outside to the inside port 22 for SSH.example outside ip address 1.1.1.1 inside ip address 10.100.100.10I know I need the commandip nat ...
All,I have a router with a basic policy-map:policy-map VOIP class VOIP priority 768 class class-default fair-queue random-detect dscp-basedcs6 71855/4018548 0/0 0/0 32 40 1/10When I do a "sh policy-m...
I have checked in 2 cisco 7609 routers i did not find the "ip load sharing per-packet" command itself on physical interface or logincal interface also.IOS tried SRA and SRC releases:---------example:-DD(config)# int mul 11 DD(config-if)#ip load-shari...
I've read a lot of Cisco documentation and have worked through the relevant sections of Jeff Doyle's book, but I'm still having difficulty with this topic. Can somebody give a "25 words or less" sort of explanation of the difference between "redistri...
I have RV016 router with 5 public ip, i was able to use two wan ip x.x.x.45,46 ponit to my lan 192.168.1.45,46 server but when i use the thrid ip x.x.x.44 point to my lan server 192.168.1.44 all other on to on nat start have problem, once i enable x....
We are using a Catalyst 3560G switch as our border router, and we are looking into Performance Routing(PfR). We are running BGP on this router and connect to two ISPs. What I have read so far about PfR tells me that you can use it if you have two bor...
Hi,I have a question that on applying CISCO layer Model in LAN switches ,COREDistributionAccess On which layer is best to define VLANS for Different Departments, we will also use VTP here,,Kindly suggest ,,, the best !!!!!Regards
We have gotten a 3G wireless card for a 2811 router we have with service through Verizon. I have activated the card and it appeared to work. Doing a show Cellular all I can see the phone number and the username and everything. However, I am not se...
Hi All Is it possible to creat a backup route using policy based routing.For example I need to route internet browsing thru ADSL link .once it fails these traffic should go thru Internet leased line.Thanks in advance
Hi All, can anyone please help me with where to download docs for moving from IOS to CATOS. Sounds crazy though, but am trying to get the hang of what it takes from moving from IOS to CATOS and vice versa.
I am trying to setup my 1721 running 12.2 as a PPTP Server with SBS 2008 RADIUS as the back end. I am trying to have the VPN clients be on the same network as the internal LAN. I have the authentication setup and have a local DHCP pool for the VPN co...
I configured Tunnel, but i am not able to ping my remote tunnel ip.ie 10.10.1.2 and vice-versa.On Mumbai Routerinter fa 0/0ip address 10.5.2.2 255.255.255.252des "connected to WAN"inter tunnel 0ip address 10.10.1.1 255.255.255.252tunnel source 10.5.2...
Hi,We have two 72xx VPN routers acting as concentrators for around 50 VPN tunnels each. They both run 12.3-8(T11) software and a VAM card. The errors we get doesn't seem to come from IOS but rather from the VAM card - am I correct ? No users have rep...
