I've seen a number of examples of this setup where 2 blocks are being advertised from the customer site(s) and some form of load sharing is achieved. Say I am advertising a /24 block to the internet from my site. I have 2 /30 point-to-point connections ( Router 6509 A goes to ISP 1 and Router B 6509 goes to ISP 2). I will have eBGP peering sessions set up with the ISP's and iBGP peering between my own two routers.I am also using GLBP for gateway redundancy between my two routers. Can someone tell me what is the best setup to consider using if I want to achieve inbound/outbound loadsharing on these connections.Also what is there to consider in this scenario and what do i need to be aware of from a provider perspective etc. ?
Does anyone have or know of any Powershell scripts to collect information from Cisco switches (Nexus, layer 2) and output to csv or Excel? Need to document a number of Cisco switches with port, vlan, routes, ACL information. Thanks
Community Live- Basic Wireshark for Networking Students
(Live event - formerly known as Webcast- Tuesday 14 April, 2020 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event will have place on Tuesday 14th, April 2020 at 10hrs PDT
Cisco IOS-XE 17.2.1 – Catalyst Switching Updates
Cisco has announced the availability of the latest IOS-XE release - IOS-XE Amsterdam 17.2. This release IOS-XE 17.2 is the next Standard Maintenance Release after 17.1 which also has a sustaining lifetime o...
In this article, we are going to talk about Cisco Umbrella Initial Setup.- The continuity of IT is the basis of today’s business environment. Almost every single decision made by business is either based on an IT data or done using the IT platform. And so...