cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
237
Views
5
Helpful
1
Replies

BGP route-map filtering command not available

cisganboy
Level 1
Level 1

I tried to perform BGP route filtering using route-map with as-path access-list, but found the under the router BGP section, the command "neighbor [IP] route-map" not available. Is it the IOS version limit?
WS-C3750X
License Level: ipservices
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(58)SE1


1 Reply 1

Mark Malone
VIP Alumni
VIP Alumni
Yes its there in 15 as per my 3750xs

(config-router)#do sh ver | i 15
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 15.0(2)SE11, RELEASE SOFTWARE (fc3)
System image file is "flash:c3750e-universalk9-mz.150-2.SE11.bin"
* 1 54 WS-C3750X-48 15.0(2)SE11 C3750E-UNIVERSALK9-M
2 54 WS-C3750X-48 15.0(2)SE11 C3750E-UNIVERSALK9-M

(config-router)#neighbor 9.99.9.9 rou?
route-map route-reflector-client


Review Cisco Networking for a $25 gift card