Hi,
Im fairly new to cisco, and i'm trying to configure a 1921 router for voice and data but don't seem to be getting anywhere.
I need to configure GigabitEthernt0/0 as WAN and set up X2 VLAN's,vlan1 on GigabitEthernt0/0/0 for data
and vlan100 on GigabitEthernt0/0/1 for voice.
The voice is going to a UC540 which will manage the phones and data to a separate switch but neither work at all, cant even get an IP address by connecting directly to GigabitEthernt0/0/0.
Would the UC540 be and just forget the 1921
Any pointer to what i'm missing would be great, here is my current config.
Current configuration : 2970 bytes
!
! Last configuration change at 18:04:06 UTC Thu Feb 4 2016
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname FreshShop
!
boot-start-marker
boot-end-marker
!
!
enable secret 5 $1$uNn/$aFklz9tl/OXc3gChU0sRj.
!
no aaa new-model
!
ip cef
!
!
!
!
ip dhcp pool vlan1
import all
network 192.168.10.0 255.255.255.0
default-router 192.168.10.254
dns-server 78.151.239.1 78.151.235.130 8.8.8.8 8.8.4.4
!
!
!
no ip domain lookup
ip name-server 78.151.239.1
ip name-server 78.151.235.130
ip name-server 8.8.8.8
ip name-server 8.8.4.4
no ipv6 cef
multilink bundle-name authenticated
!
vpdn enable
!
vpdn-group 1
request-dialin
protocol l2tp
!
!
!
license udi pid CISCO1921/K9 sn FGL184125M9
!
!
username fresh privilege 15 secret 5 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
username cisco privilege 15 secret 5 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
!
!
bridge irb
!
!
!
!
interface Embedded-Service-Engine0/0
no ip address
shutdown
!
interface GigabitEthernet0/0
ip address dhcp
ip access-group Internet-Inbound-ACL in
ip nat outside
ip virtual-reassembly in
ip tcp adjust-mss 1460
duplex full
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
no cdp enable
!
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
!
interface GigabitEthernet0/1.1
encapsulation dot1Q 1 native
ip address 192.168.10.254 255.255.255.0
!
interface GigabitEthernet0/1.100
encapsulation dot1Q 3
ip address 10.1.1.254 255.255.255.0
!
interface GigabitEthernet0/0/0
switchport mode trunk
no ip address
!
interface GigabitEthernet0/0/1
switchport access vlan 100
no ip address
!
interface GigabitEthernet0/0/2
no ip address
!
interface GigabitEthernet0/0/3
no ip address
!
interface Vlan1
description Data
no ip address
ip nat inside
ip virtual-reassembly in
bridge-group 1
bridge-group 1 spanning-disabled
!
interface Vlan100
no ip address
ip nat inside
ip virtual-reassembly in
!
interface Dialer0
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1432
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
ppp authentication chap callin
ppp chap hostname ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ppp chap password ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
no cdp enable
!
interface Dialer1
no ip address
!
interface BVI1
description Bridge to Internal Network
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip nat inside source list 1 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 0.0.0.0 0.0.0.0 dhcp
!
!
!
!
control-plane
!
bridge 1 route ip
!
!
line con 0
logging synchronous
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
login
transport input all
!
scheduler allocate 20000 1000
!
end
