cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1410
Views
0
Helpful
4
Replies

cannot open config file

anisha.vi
Level 1
Level 1

Hello,

Can anyone help me with this:

Router#sh config
Using 3670 out of 196600 bytes
%Error opening nvram:/startup-config (Device or resource busy)

I get this error. Can someone help me in getting theconfig file open.

Thanks very much.

Regards,

Anisha.

1 Accepted Solution

Accepted Solutions

The command to use is "clear line 194" not "clear line vty 194".

Jon

View solution in original post

4 Replies 4

Jon Marshall
Hall of Fame
Hall of Fame

anisha.vi wrote:

Hello,

Can anyone help me with this:

Router#sh config
Using 3670 out of 196600 bytes
%Error opening nvram:/startup-config (Device or resource busy)

I get this error. Can someone help me in getting theconfig file open.

Thanks very much.

Regards,

Anisha.

Anisha

Please use this doc to resolve the problem -

Error opening  startup-config

Jon

Hi Jon,

Thanks much for the quick response.

I have already tried that, but it did not work for me. Igot the following errors:

Router_1841#sh config

Using 3670 out of 196600 bytes
%Error opening nvram:/startup-config (Device or resource busy)
Router_1841#sh users
    Line       User       Host(s)              Idle       Location
  vty 194      user 1       idle                 03:38:42 66.193.16.153
* vty 195     user 2       idle                 00:00:00 66.193.16.153

  Interface    User               Mode         Idle     Peer Address

Router_1841#clear line vty 194
% 194 is an illegal line number [OK]
Router_1841#

Please help me reolve this one.

Thanks very much.

Regards,

Anisha.

The command to use is "clear line 194" not "clear line vty 194".

Jon

Yes. Got itttttttt Jon...

Thanks very much...:)

Anisha

Review Cisco Networking for a $25 gift card