Hi,
I have a Cisco 12006 and two STM-16 / OC-48 interface cards. One of them is a one port ISE card and the other is a one port SPA (inserted in a SIP 401). IOS version is 12.0(32)SY recommended for this kind of hardware. I connected both ports back to back and they seem to be working OK. The thing is that if I send ICMP packets bigger than 120 bytes, they fail. Interface configs are:
interface POS0/1/0
ip address 10.10.10.2 255.255.255.252
no ip directed-broadcast
encapsulation ppp
no ip mroute-cache
load-interval 30
crc 32
clock source internal
pos framing sdh
pos flag s1s0 2
interface POS5/0
ip address 10.10.10.1 255.255.255.252
no ip directed-broadcast
encapsulation ppp
no ip mroute-cache
load-interval 30
crc 32
clock source internal
pos framing sdh
pos scramble-atm
pos flag s1s0 2
ANY IDEA WHY THIS IS HAPPENING AND HOW CAN I SOLVE IT?
My final goal is to perform some BER testing in these interfaces.
Thanks a lot for any help!!!
Nataniel
