Cat 4013 running 8.4.11GLX - no set ssh mode v2 command

[cidisbell]

I am trying to figure out why I cannot set the ssh mode to v2 on this switch.  When I issue the set ssh mode command, it is not recognized.

xxxxxxxxx> (enable) set ssh mode v2

Unknown command "set ssh". Use 'set help' for more info.

modules:

Mod Port Model                         Versions
--- ---- ------------------ -------------------- ---------------------------------
1   2    WS-X4013                    Hw : 3.2
                                                 Gsp: 8.4(11.0)
                                                 Nmp: 8.4(11)GLX
2   48   WS-X4148-RJ                 Hw : 3.0
3   48   WS-X4148-RJ                  Hw : 3.0
4   48   WS-X4148-RJ                 Hw : 3.0

[Giuseppe Larosa]

Hello Cidisbell,

may you post a sh ver to see exactly what image is running

by the way the same happens on my C4006 running the same catos version

switch(enable) set ssh ?
Unrecognized command!

in my case

Mod Port Model              Serial #              Versions
--- ---- ------------------ -------------------- ---------------------------------
1   2    WS-X4013           JAE06210259          Hw : 3.2
                                                 Gsp: 8.4(11.0)
                                                 Nmp: 8.4(11)GLX

the command is not present in catos command reference

http://www.cisco.com/en/US/docs/switches/lan/catalyst4000/8.3and8.4glx/command/reference/set_s_z.html

Hope to help

Giuseppe

[cidisbell]

The exact COS file is: cat4000-k9.8-4-11-GLX.bin

Looks like you have a 4013 as well.