CAT6509 issue

[chris.lau]

Hi,

I have a CAT6509 switch with Sup2 and MSFC card. The problem is I cannot ping my layer 2 management ip, 10.10.10.4, but, 10.10.10.3 is pingable. can I know why?

#

set feature mdg enable

set feature psync-recovery no-powerdown

set interface sc0 1 10.10.10.4/255.255.255.128 10.10.10.127

set feature mdg enable

set feature psync-recovery no-powerdown

set interface sc0 1 10.10.10.4/255.255.255.128 10.10.10.1

#Router ip

VEMCBMP003#sh ip int br

Interface IP-Address OK? Method Status Protocol

Vlan1 10.10.10.3 YES NVRAM up up

[jackyoung]

Hi Chris, please don't cross-post the same question in different areas. Keep it in LAN Switch is fine.