Channelized E1

[okanyilmaz]

Hi all,

I wonder whether i can connect a 256k connection in terms of 4 timeslots to a 2610 router. I mean is it possible to configure channelized E1 on 2610?

Perhaps it can be done with channel-groups? or not?

[pkhatri]

Hi,

Yep. It is certainly possible as long as you have a channelised-E1 card of some sort. You configure it using channel-groups as usual.

Hope that helps - pls rate the post if it does.

Paresh

[olorunloba]

For channelised E1 on the 2600, you might want to use MultiFlex Trunk Cards. i.e. VWIC-MFT-E1. Check the folliwng link

http://www.cisco.com/en/US/products/hw/routers/ps221/products_data_sheet09186a0080088715.html

The channel group configuration is supported, though you might not be able create more than two channel groups. Check also

http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800b6e0f.shtml#multichan

[okanyilmaz]

thank you