cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1035
Views
0
Helpful
5
Replies

CISCO 2921 ROUTER WITH LOUD NOISE

benojefua
Beginner
Beginner

I have a 2921 router which has suddenly started making a loud noise. I assume this is from the fans. The system LED light is also amber. Any ideas what might be causing this and ways to resolve?

Thanks.

1 Accepted Solution

Accepted Solutions

Leo Laohoo
VIP Community Legend VIP Community Legend
VIP Community Legend

@benojefua wrote:
Sep 25 2020 03:17:24.568 CAT: %MAINBOARD-3-I2CRW_ERROR: Read failure - Device @ 0x30, offset 0x00000001 on I2C bus 0

Contact Cisco TAC and organize for an RMA.  

The sound you hear is the sound of the motherboard "frying" and the above logs prove it.

View solution in original post

5 Replies 5

Leo Laohoo
VIP Community Legend VIP Community Legend
VIP Community Legend

What does the logs say?

Please see below what i have from the logs.

018988: Sep 25 2020 03:17:19.552 CAT: %IP_SNMP-4-NOTRAPIP: SNMP trap source GigabitEthernet0/0 has no ip address
018989: Sep 25 2020 03:17:24.568 CAT: %MAINBOARD-3-I2CRW_ERROR: Read failure - Device @ 0x30, offset 0x00000001 on I2C bus 0
018990: Sep 25 2020 03:17:24.568 CAT: %MAINBOARD-3-I2CRW_ERROR: Read failure - Device @ 0x30, offset 0x00000002 on I2C bus 0
018991: Sep 25 2020 03:17:29.584 CAT: %MAINBOARD-3-I2CRW_ERROR: Read failure - Device @ 0x30, offset 0x00000002 on I2C bus 0

 

  https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvd35848/?rfs=iqvred

  (possibly)

  

  M.

  



-- ' A nun once asked a penguin ' do you think the earth is flat ? ; the penguin replied :
Madam, it all depends , in Riemann geometries the earth can be perfectly flat! The nun thanked him , he tripped and fell forward : the poor animal had forgotten that he might be living in a Riemann geometry too!

Leo Laohoo
VIP Community Legend VIP Community Legend
VIP Community Legend

@benojefua wrote:
Sep 25 2020 03:17:24.568 CAT: %MAINBOARD-3-I2CRW_ERROR: Read failure - Device @ 0x30, offset 0x00000001 on I2C bus 0

Contact Cisco TAC and organize for an RMA.  

The sound you hear is the sound of the motherboard "frying" and the above logs prove it.

Thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers