cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
624
Views
0
Helpful
3
Replies

Cisco 7500 issue

ashkenadili
Level 1
Level 1

Hi,

I have upgraded the IOS on Cisco7513 to rsp-jsv-mz.124-12.bin. since the upgrade I cannot use traffic-shape with service-policy on the interface's, it allow's me to use only one service-policy on the interface or subinterface's i have regardless to other subinterfaces, on the same physical interface. i keep getting this message when i try:

(config-subif)#service-policy output shape

Adding shape will make bandwidth allocation among pvs ambiguous

I'm not quite sure what should i do.

Thanks in advance.

3 Replies 3

Amit Singh
Cisco Employee
Cisco Employee

I have come across a link. check if this helps you:

http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a00800a96b5.shtml

HTH,

-amit singh

Hi,

I had already distributed cef enabled on the router,

thanx.

mesuti
Level 1
Level 1

Hi,

I have the same error message,

"Adding shape will make bandwidth allocation among pvs ambiguous "

I've checked cisco documentation but didn't find something useful that can alleviate or explain this problem...

Does anyone can help me with some information...

thanks in advace