Routing

Hello,i have an analog Access to my local provider in Germany. Can i use ADSL2+ on Cisco 857W in Germany over analog telephone lines? I know, the router support this, but does this router work in Germany with this options?

My new 877W router was configured by a technitian using command line interface. As a consequence I have now lost the use of the SDM program that came with the router.The error message says that http/https access must have been disabled.Not being too...

HelloCould somebody help me?In this network: PC>>C2900XL>>R1721>>R2523I can't ping the R2323 router from the PC.This is my PC config(no firewall):172.16.1.18255.255.255.240172.16.1.1In attach you can find the configs from both routers and the switch....

we are installing several sprint point to point T1's, i want to verify my configuration this is configured on acisco 2811 router.THANKScontroller T1 0/1/0 framing esf linecode b8zs channel-group 0 timeslots 24!controller T1 0/1/1 framing esf linecode...

I have two offices one in Class A IP addressing 10.200.X.X/ 255.255.0.0 & other office is using class B IP addressing 172.17.2.x/ 255.255.255.0. Can I use one 24 port switch and use 12 ports for office A & 12 ports for office B using VLANs

I have subscribed two broadband links from the same ISP for connecting branch office to the head office. I am using Cisco2600 router at the branch and it has two ethernet interfaces. I am planning to use the two WAN links by configuring one ethernet ...

Good day;I need some advice, I have a BGP route that goes through a provider which connects me to a customer. I'm required to statically NAT my addresses to the provider's IP address to reach my customer. Below is what I have configured will this wo...

We are trying to deploy 831s or 871s as a work from home solution using VPN. The basic setup works great as far as setting up easyvpn and having the switch ports on the router connect back to the corporate network. Is it possible, however, to set up ...

1#004523: Mar 29 15:40:45.353 SAST: ISDN BR0 SERROR: isdn_get_guid: Cannot allocate a GUID (5)004524: Mar 29 15:40:45.353 SAST: ISDN BR0 SERROR: isdn_get_display_text_from_gtd: false ret004525: Mar 29 15:40:45.353 SAST: ISDN BR0 SERROR: isdn_get_mlpp...

Hi, Kindly let me know , when i configure CBR or vbr-nrt , in which case do i have to give bandwith in Kbps and in which case i have to give bandwith in Cells.regardsNeo

We are implementing a terminal server implementation, and we are also adding a point to poitn link, so we will have two t1 point to point links for this location. We have a 3825 at the central office with Enterprise services IOS 12.4, and a 2801 with...

Hello,I have one upstream provider, and that upstream provider is connected to internet with two routers (and also two ISP's). When one of that upstream ISP routers is down I lose connectivity for 4 minutes to internet. What is convergence time for B...