04-28-2010 03:29 PM - edited 03-04-2019 08:18 AM
Hi all,
Can any one tell me if in an envyroment with 2 cisco 6500 in a VSS system with the vss links on the sup and on a line card, if we remove the supervisor from the stanby chassis, does that chassi will still work.
Many thanks
04-28-2010 04:39 PM
Hi,
As long as you remove one link you are Ok but if you remove both VSL links once you reconnect them the primary will reboot.
So, with one you are fine
HTH
Reza
04-28-2010 06:21 PM
You mean to say if you remove the SUP engine from the chassis will that particular chassis work, it is like breaking the VSL link that chassis will not provide any functions but the other one will do the job.
VSS provides Interchassis SSO and NSF which means if one chassis/SUP dies other will do the job.
04-29-2010 12:19 AM
In this particular scenario i have the VSL link made with one link on the supervisor and another link on one port on a 8x10G module, if for same reason i remove the standby sup from the chassis what will hapen to that chassis, will still work evem without the superviser/swichfabric-card.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide