12-19-2013 10:55 PM - edited 03-04-2019 09:54 PM
Hi,
does anyone have experience with CSR1000V and WCCP ?
We're struggeling with getting the physical WAE connected onto the CSR.
Debugs show the HIA packets but it's not coming up.
We also tried to enable promiscious mode on the interface which also didn't fix the problem.
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-ADVENTERPRISEK9-M), Version 15.3(2)S2, RELEASE SOFTWARE (fc1)
IOS XE Version: 03.09.02.S
It runs on ESX
12-20-2013 09:23 AM
Hi Brandon,
On your ESX vSwitch, what security settings do you have? I've not tried the CSR 1000V with WAE/WCCP, but have seen issues when using CSR 1000V with Riverbed Steelhead unless I changed the Promiscuous Mode setting under the vSwitch Security tab from Reject to Accept.
Regards
01-14-2014 05:04 AM
Tried with reject , tried with accept, no working.
packet dump shows HIA packets and conversation between WAE <->CSR
01-22-2014 05:21 AM
it was the assignment method.
CSR supports only mask assignment like the ASR.
Problem fixed.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide