Hi CISCO,
Can anyone tell me serial interface DTE=> DTR, RTS, DCE=>DCD, DSR and CTS meaning effects one by one and what happens when it is in down state
DCE=>
DCD- Meaning, Down effects, who responsible, troubleshooting, lease line effects, what is the exact issue (if down one share details one by one )
DSR-Meaning, Down effects, who responsible, troubleshooting, lease line effects, what is the exact issue (if down one share details one by one )
CTS-Meaning, Down effects, who responsible, troubleshooting, lease line effects, what is the exact issue (if down one share details one by one )
DTE=>
DTR-Meaning, Down effects, who responsible, troubleshooting, lease line effects, what is the exact issue (if down one share details one by one )
RTS-Meaning, Down effects, who responsible, troubleshooting, lease line effects, what is the exact issue (if down one share details one by one )
Also tell and elaborate in simple language
DCD - This signal is output by the DCE to indicate that a valid carrier has been detected.
DTR - This signal is output by the DTE to indicate that it is ready for communication.
DSR - This signal is output by the DCE (in response to DTR) to indicate that it has been switched on and connected to the communications channel.
RTS - This signal is output by the DTE to indicate that it is ready to send data.
CTS - This signal is output by the DCE to acknowledge RTS and to indicate that it is ready for data transmission.
