05-24-2005 10:00 PM - edited 03-03-2019 09:40 AM
Hi..
I have two routers running OSPF, on router A i had enabled debug all command, router A cpu utilization increased by 10%. But on the other had Router B utilization reached 99% FROM 35%. I know that the router that we enabled debug all command will be affected but not the other router.
Does anyone have a logical answer for this case?
Thanks...
05-24-2005 11:38 PM
Hello,
are both routers the same model and do they have the same hard- and software configuration and IOS version ? Since you are running OSPF, do both routers have the same role in the OSPF network ?
You might want to check the processes running on both routers with the command ´show proc´, the one with the 99% CPU utilization might be running more processes, which might explain the difference in utilization...
HTH,
GP
05-25-2005 09:20 PM
Hi..
The routers are from diffrent models and diffrent IOS, yes they have the same role on OSPF.
The router with the 99% CPU utilization run more processes. But will the debug all command that is running on router A affect the performance of router B (99% router), because when we switched it off on router A the CPU utilization of router B dropped from 99% to 39%.
Thank you,, i appreciate your help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide