Error on Cisco 877 router

[noobieee7]

Hi,

I am having this error on my Cisco 877 router. I have swapped a fresh new one but it is still giving me the same error.

Apr 24 21:20:22: esw_dtc_ltc4258_reg_write: no acknowlege from POE

Apr 24 21:20:22: esw_mrvl_pdc_hardware_config failed on slot 0/0

Apr 24 21:20:24: esw_dtc_ltc4258_reg_write: no acknowlege from POE

Apr 24 21:20:24: esw_mrvl_pdc_hardware_config failed on slot 0/0

Apr 24 21:20:49: esw_dtc_ltc4258_reg_write: no acknowlege from POE

Apr 24 21:20:49: esw_mrvl_pdc_hardware_config failed on slot 0/0

Apr 24 21:20:51: esw_dtc_ltc4258_reg_write: no acknowlege from POE

Apr 24 21:20:51: esw_mrvl_pdc_hardware_config failed on slot 0/0

Any advise?

[Sushil Kumar Katre]

Hi,

Do you have this module installed on the router -

800-ILPM-4

4 port 802.3af capable Inline power module for 870 routers

If not then this is a cosmetic issue.

BUG - CSCsd68389

870 displays POE message unexpectedly when no POE module installed

Alternate Headline: 870 displays POE message unexpectedly when no POE module installed

Symptom:

A Cisco 871W may display a log message that the POE module is not responding even

though there isn't a POE module installed.

An example is:

esw_dtc_ltc4258_reg_write: no acknowlege from POE

Conditions:

This may show up randomly in the logs. It's a cosmetic issue that does not

affect the operation of the device.

Workaround:

None.

If you don't have the module please ignore these messages.

-> Sushil