Hello
I am trying to configure an ISR 4331 with GLBP, but it gives an error, the config is:
interface GigabitEthernet0/0/1.70
encapsulation dot1Q 70
ip address 10.1.70.1 255.255.255.0
glbp 70 ip 10.1.70.254
glbp 70 preempt
glbp 70 authentication md5 key-chain morphism
glbp 470 ipv6 autoconfig
glbp 470 preempt
glbp 470 authentication md5 key-chain morphism
ipv6 address FE80::1 link-local
ipv6 address 2001:DB8:CAFE:70::1/64
The router don't accept "glbp 470 ipv6 autoconfig", actually the router dont accept any glbp 470 ipv6 commands at all.
I have tried a slightly modified config on a Catalyst C3650, and the L3 switch accept glbp 470 ipv6 commands.
Can anyone tell me if it is because the ISR 4331 cant be configured for GLBP IPv6.
ISR 4331 IOS ver.: IOS-XE 03.16.04b.S
Thanks
- sd
