Hi cisco, I have a question. plz contact me!

[Soon Kwan Kwon]

Hi, I'm a Korean engineer.

Today, I have a trouble about backbone supervisor module WS-SUP720-3B.

I tested module WS-X6148A-GE-TX with SUP720-3B.

But, in the CLI, this sentense came out ... "not support slot 2, 3."

(slot 2,3 = WS-X6148A-GE-TX)

So I read a datasheet, but WS-X6148A-GE-TX was not listed anywhere.

(http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/69583-ptn.html)

So, I am wondering if WS-X6148A-GE-TX is not supported by SUP720-3B? right?

plz contact me...

Regards,

[Leo Laohoo]

Can you post the complete output to the command "sh module"?

[Soon Kwan Kwon]

Here it is!

[Iulian Vaideanu]

It seems that WS-X6148A-GE-TX is supported with Supervisor Engine 720 since IOS release 12.2(18)SXF, so SXE (which your SUP seems to be running) won't do - see section "Software support" of Table 2-10 here:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/hardware/Module_Installation/Mod_Install_Guide/6500-emig/02ethern.html#wp1042813

[Soon Kwan Kwon]

Wow...

Thank you so much!

It is so helpful to me!

[Soon Kwan Kwon]

WOW !

Thank you so much!! Leo Laohoo, Iulian Vaideanu !

Ah,,, now I understand all your opinion^^

Have a nice day~

[Leo Laohoo]

I agree.  You need to upgrade the IOS of the supervisor card.