04-20-2015 08:32 PM - edited 03-05-2019 01:17 AM
Hi, I'm a Korean engineer.
Today, I have a trouble about backbone supervisor module WS-SUP720-3B.
I tested module WS-X6148A-GE-TX with SUP720-3B.
But, in the CLI, this sentense came out ... "not support slot 2, 3."
(slot 2,3 = WS-X6148A-GE-TX)
So I read a datasheet, but WS-X6148A-GE-TX was not listed anywhere.
(http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/69583-ptn.html)
So, I am wondering if WS-X6148A-GE-TX is not supported by SUP720-3B? right?
plz contact me...
Regards,
04-20-2015 10:27 PM
Can you post the complete output to the command "sh module"?
04-20-2015 11:03 PM
04-21-2015 12:30 AM
It seems that WS-X6148A-GE-TX is supported with Supervisor Engine 720 since IOS release 12.2(18)SXF, so SXE (which your SUP seems to be running) won't do - see section "Software support" of Table 2-10 here:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/hardware/Module_Installation/Mod_Install_Guide/6500-emig/02ethern.html#wp1042813
04-21-2015 02:41 AM
Wow...
Thank you so much!
It is so helpful to me!
04-21-2015 02:49 AM
WOW !
Thank you so much!! Leo Laohoo, Iulian Vaideanu !
Ah,,, now I understand all your opinion^^
Have a nice day~
04-21-2015 01:10 AM
I agree. You need to upgrade the IOS of the supervisor card.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide