I need to configure high availability between two sites, today the traffic to Internet from the network A is routed to CoreA, then the CoreA send the traffic to Router A and through a static default route the traffic is sent to Internet. Now a new site is incorporated to the Network A. The RouterB has a default route to InternetB. How I can enable high availability between the site A and site B, for example if the RouterA fail, the traffic from the network must be routed to RouterB, the same scene for the network B, if the RouterB fail, the traffic from the network B must be routed to RouterA. Which feature I can configure? The RouterA and RouterB are Cisco2800 and the Core´s are 3750 with EnhancedImage.
Bitcoin Support number is the best place to get your bitcoin wallet issues and problems resolved within minutes. Bitcoin phone support have some of the best people to provide you help and much needed advice to make big in bitcoin like many have done. Bitc...
This is a new product launch - Catalyst 8000 Edge Platforms Family Overview. We will go over the series Catalyst Cellular Gateway in great detail.
Speaker: David Roten, Technical Marketing Engineer at Cisco
David is a Technical Marketing Engineer for...
“Use Serviceability Features to Troubleshoot your Cat9K as a Cisco TAC Engineer”
This event will have place on Tuesday 1st, December 2020 at 10hrs PDT
This event provides an introduction to the main Cat9K serviceability features. Serviceability is t...