How can I check what bandwidth a 4G router think it have other than the 100/50 theoretical interface speed its gets on the line as per the example Cisco configs?
All I can see so far is some radio signal information, such as:
Router#sh cellular 0 radio
Radio power mode = ON
LTE Rx Channel Number = 6400
LTE Tx Channel Number = 24400
LTE Band = 20
LTE Bandwidth = 10 MHz
Current RSSI = -64 dBm
Current RSRP = -92 dBm
Current RSRQ = -9 dB
Current SNR = 28.6 dB
Radio Access Technology(RAT) Preference = AUTO
Radio Access Technology(RAT) Selected = LTE
Is there not the equivalent of seeing the attainable bit rate based on signal as there is for DSL links?