12-13-2005 07:20 AM - edited 03-03-2019 11:13 AM
Hi,
can I configure the HWIC-4ESW to operate in different vrfs (lite) on a Cisco 1841 ?
Carsten
12-19-2005 07:39 AM
I think it supports different lite's. But the following document has in it all relevant details with HWIC-4ESW.This might provide you with your required information.
http://www.cisco.com/en/US/products/ps5853/products_qanda_item0900aecd8016c026.shtml
02-27-2006 09:22 PM
I am also endeavouring to use this module (on a 3825) and need to assign a single port to a VRF. The document mentioned does not specifically cover this topic.
The port is successfully placed into the vrf (and vlan). In the vrf arp table a pc connected to the port can be seen by its MAC address but no IP traffic is able to flow.
Has anyone had a positive result and managed to have a port in a VRF and get IP connectivity?.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide