cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
301
Views
0
Helpful
1
Replies

If load sharing is possible by this 10:2 ratio?

saravanavel105
Level 1
Level 1

Hi,

I have two different isp's with different bandwidth.In this networks are advertised by eigrp protocol & packets are sending ip load sharing per packets configuration. 

1.Isp-1 having a 10Mbps bandwidth & Isp-2 having a 2Mbps bandwidth

In this scenario if it is possible to do the load sharing ? If yes Please explain.

1 Reply 1

Joseph W. Doherty
Hall of Fame
Hall of Fame

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

I think it's possible, but I'm far from being an EIGRP expert.  BTW, PfR PIRO should also be able to do this, and do it based on actual link loading.

Also BTW, I would highly recommend against doing per packet load sharing.  In theory, IP doesn't care, but many application using IP do care.