Implementing QoS for Voip on 2821 router

[mulhollandm]

folks

i have a 3750 switch running mls qos globally and then auto qos for cisco-phones & i need to setup the QoS on the router

i have a 2821 but haven't done this before

does anyone have a link to any decent config guides - i suspect it involves route-maps etc

thanks to anyone taking the time to reply

[pkhatri]

Try this for starters:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hqos_c/part50/hautoq1.htm

Pls do remember to rate posts.

Paresh

[mheusinger]

Hello,

besides AutoQoS for VoIP, which Paresh pointed you to, there is also AUtoQoS for the Enterprise available now, which will allow you to also include your data applications. The detailed description of the feature and some config examples are found at

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hqos_c/part50/hautoq2.htm

Hope this helps! PLease rate all posts.

Regards, Martin