03-24-2019 11:21 PM
Hello all
I need to change the router from c2800 router to isr4331.
The c2800 router has the fair-queue 64 256 0 command.
but I can not find the fair-queue command on isr4331.
How can I use the fair-queue command in isr4331 interface?
C2800 router
interface Serial0/0/1
description ### x.x.x ###
bandwidth 64
ip address x.x.x.x 255.255.255.252
thank you
fair-queue 64 256 0
Solved! Go to Solution.
03-25-2019 02:08 AM
Hello,
the fair-queue command has been deprecated in XE. You need to use a class map and the default class to configure it:
Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# fair-queue
Router(config-pmap-c)# fair-queue dynamic-queues
Router(config-pmap-c)# fair-queue queue-limit packets
Check the link below and scroll down to the 'Configuring Weighted Fair Queueing' section...
03-25-2019 02:08 AM
Hello,
the fair-queue command has been deprecated in XE. You need to use a class map and the default class to configure it:
Router(config)# policy-map policy-map-name
Router(config-pmap)# class class-default
Router(config-pmap-c)# fair-queue
Router(config-pmap-c)# fair-queue dynamic-queues
Router(config-pmap-c)# fair-queue queue-limit packets
Check the link below and scroll down to the 'Configuring Weighted Fair Queueing' section...
03-25-2019 07:13 AM
03-25-2019 07:59 PM
Thank you for your reply.
03-25-2019 08:00 PM
Thank you for your reply.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide